We specialize in installing the following commercial systems:

• Flat-roof systems for commercial buildings
  • Non-penetrating (ballasted) systems and
  • Penetrating systems
• Ground-mounted systems

Ballasted System Installation Steps

Step 1: layout solar module mounting system

Step 2: Attach modules to mounting system

Step 3: Insert ballast into mounting system

Step 4: Wire rooftop system to produce electricity

Step 5: Install Inverter

Step 6: Connect Modules to Inverter

Step 7: Commission System

Technical Details

• 10-30 kW installed per day depending on system used
• Non-penetrating ballasted systems
  • Constructed of aluminum alloy material
  • Tested to withstand up to 125 mph winds
  • Can be tilted up to 25 degrees depending on system used
  • Weigh between 5 and 6 pounds per square foot
  • Eliminates potential for roof leaks
• Penetrating systems
  • Lighter than ballasted systems
  • Can be designed to withstand higher wind speeds
  • When installed properly, low potential for roof leaks
• Ground-mount Installations
  • Allows for faster installations
  • Module tilt angles can be increased